[Official] Download LineageOS Yu Yureka (tomato) Nougat 7.1.1

Download Official Lineage OS For Yu Yureka (tomato) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Yu Yureka (tomato) requires the bootloader to be unlocked on the Yu Yureka (tomato) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Yu Yureka (tomato) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Yu Yureka (tomato) using TWRP recovery.

How to Install a official Lineageos on Yu Yureka (tomato)

1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Yu Yureka (tomato)

1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 for Yu Yureka (tomato)

3.How to Root official Lineage OS rom Easily

[Official] Download LineageOS Yu Yuphoria (lettuce) Nougat 7.1.1

Download Official Lineage OS For Yu Yuphoria (lettuce) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Yu Yuphoria (lettuce) requires the bootloader to be unlocked on the Yu Yuphoria (lettuce) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Yu Yuphoria (lettuce) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Yu Yuphoria (lettuce) using TWRP recovery.

How to Install a official Lineageos on Yu Yuphoria (lettuce)

1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Yu Yuphoria (lettuce)

1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 for Yu Yuphoria (lettuce)

3.How to Root official Lineage OS rom Easily

[Official] Download LineageOS Wileyfox Swift (crackling) Nougat 7.1.1

Download Official Lineage OS For Wileyfox Swift (crackling) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Wileyfox Swift (crackling) requires the bootloader to be unlocked on the Wileyfox Swift (crackling) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Wileyfox Swift (crackling) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Wileyfox Swift (crackling) using TWRP recovery.

How to Install a official Lineageos on Wileyfox Swift (crackling)

1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Wileyfox Swift (crackling)

1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 for Wileyfox Swift (crackling)

3.How to Root official Lineage OS rom Easily

[Official] Download LineageOS Wileyfox Storm (kipper) Nougat 7.1.1

Download Official Lineage OS For Wileyfox Storm (kipper) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Wileyfox Storm (kipper) requires the bootloader to be unlocked on the Wileyfox Storm (kipper) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Wileyfox Storm (kipper) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Wileyfox Storm (kipper) using TWRP recovery.

How to Install a official Lineageos on Wileyfox Storm (kipper)

1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Wileyfox Storm (kipper)

1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 for Wileyfox Storm (kipper)

3.How to Root official Lineage OS rom Easily

[Official] Download LineageOS 14.1 Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi) Nougat 7.1.1

Download Official Lineage OS For Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi) requires the bootloader to be unlocked on the Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi) using TWRP recovery.

How to Install a official Lineageos on Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi)

1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi)

1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 for Galaxy Tab S 9.2 (Wi-Fi) (gts210vewifi)

3.How to Root official Lineage OS rom Easily

[Official] Download LineageOS 14.1 Galaxy Tab S 8.0 (Wi-Fi) (gts28vewifi) Nougat 7.1.1

Download Official Lineage OS For Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:

THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) requires the bootloader to be unlocked on the Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known

Before Starting

Take care of following tasks before you proceed with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.

Task 4: USB Debugging should be enabled on your device.

Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) using TWRP recovery.

How to Install a official Lineageos on Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi)

1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
2. Boot your device into TWRP recovery.
3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
   └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
   
4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
   
6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi)

1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 for Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi)

3.How to Root official Lineage OS rom Easily