How to Install twrp Recovery and Root Cubot Max

Root twrp For Cubot Max-
twrp recovery and Root Guide now available for Cubot Max, you can install twrp Recovery and Root your Cubot Max by Following Bellow Guide,

This IS a Latest twrp recovery and Root guide for Cubot Max, you can install twrp Recovery via Sp flash tools and the Root Cubot Max by Flashing the latest SuperSu.zip file, Rooting may void your Device warranty and also wrong use cause Damage on your Device so be careful before Doing anything, we are Not responsible fo any Damage, after rooting you can install CustoM rom and custom zip file on your Device, you can also tweak your Device using Xposed framework and Build.prop Follow Below Guide to install twrp recovery and root Cubot Max,

Note:-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• This is the stable version of Rom/Recovery.
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process

Read Also-

• How to Repair IMEI Number on Android Devices
• Backup Stock Rom on Android without Recovery
• How to Increase Internet Speed {signal} On Android Devices

Requirements-

• Sp Flash tool latest Support MT67XX / or Use From Rom 
• pc and usb  
• vcom Driver must installed  
• twrp For u7 plus by bianchi
• SuperSU  
• How to install Xposed framework On Cubot Max

How to install twrp Recovery on Cubot Max-

• Download and unzip the archive.
• Check that the USB Preloader driver are installed and use a recent version of Flashtrool.
• The device should be switched off and disconnected by PC.
• Run Flashtool, selct the scatter, check that only BOOT partition is flagged, then select DOWNLOAD.
• Only now Connect the device (switched off) to the PC with a short USB cable directly connecetd to USB PC port.
  Wait the end of Flashtool process (green tick).
• After that you can disconnect the device from PC.
• To test the recovery press in the device POWER and VOLUME+ to start in recovery mode.
• Please don't enable in recovery mode the system as writable (make a bootloop)
• To restart from recovery in normal mode select REBOOT SYSTEM.

How to Root Cubot Max-

• Download Supersu.zip from above and put into Root Of Sd Card
• Boot Device into twrp [use command adb reboot recovery] or hold power and volume up key on switch of mod
• Allow Modification
• make a nandroid backup
• Click install Zip from sd crad
• Locate Downloaded Supersu.zip file and Swipe to install
• after Success go back and reboot system now
• Done,

So this IS a Complete Guide to install twrp recovery and root Cubot Max, if you have any question let us know via Comment,
Search tag-

root Cubot Max, twrpCubot Max, root guide for Cubot Max, root install on Cubot Max, como instaler twrpCubot Max, twrp download forCubot Max, cm14 for Cubot Max custom Rom for Cubot Max install twrpr ecoverty on Cubot Max rooting guide for Cubot Max, cara root Cubot Max,