How to Install Stock Rom on Swipe Elite Power

Official Rom for Swipe Elite Power-

Stock Rom now available for Swipe Elite Power, you can Download and install this Rom on your Device by following Below Guide,

 

Here is a Step by Step Guide to install Stock Rom/ firmware/ flash file on Swipe Elite Power, you can install official Rom  on your Swipe Elite Power by using QPST tools and also via fastboot, here we will share a QPST method To Install Official Rom on Swipe Elite Power, Flashing The Rom will erase all your Personal data and you are back on stock, wrong flashing of the Rom cause damage on your Device so be careful before Flashing and Flash on own Risk we are not Responsible for any Damage, follow Below Guide to install Stock Rom on Swipe Elite Power,

Firmware Details-

Device- Swipe Elite Power

Chip- Qualcomm

Language- Multi

Root Access- Not

OS- Marshmallow 

Note:

• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your personal data including data of internal storage, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.

Read Also-

• How to Repair IMEI Number on Android Devices
• Backup Stock Rom on Android without Recovery via adb
• How to install HI-Fi Audio System on any Android Device

Requirements-

• Qpst Tools
• Flash File Full Rom Elite Power
• PC and usb

The Whole Process Complete In 2 Steps-

• Driver Installation
• Software Upgrade

Driver Installation-

1- Download and install Qualcomm driver. While installing driver avoid using cable for successful installation.

2- After installation, connect Phone to PC using USB cable.

3- While connecting to PC, phone should be switched off and press volume up & down as boot key.

4- If it makes Qualcomm port, then driver has been successfully installed.

Software Upgrade-

Step: 1- Download the QPST tool & driver  and Rom File From above and extract in Folder,

Step: 2- Make sure your device has the Power to support flashing.

Step: 3- Run QFIL tool.rom Extract folder,

Step: 4- Click on Browse under the Programmer path to select MBN File.

Step: 5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.

Step: 6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml

Load XML comes with two option:

a- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.

b- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.

Step: 7- Switch off the device and connect it to PC by pressing Volume up & down key.

Step: 8- Click on Select Port and choose the port.

Step: 9- Click on Download to start flashing.

Step: 10- Unplug USB cable, when Finish Download appears.

Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.

So This Is A Complete Guide to Install stock Rom on Swipe Elite Power if you have any question Let Us know Via Comment,

Search tag-

Stock Rom for Swipe Elite Power, Firmware for Swipe Elite Power, flash file for Swipe Elite Power cara flash Swipe Elite Power, como instaler Swipe Elite Power, rom download for Swipe Elite Power, rom installation on Swipe Elite Power, como downloader Swipe Elite Power,  unbrick Swipe Elite Power, twrp Swipe Elite Power,