How to install Stock Rom on Samsung Galaxy A3 SM-A300F

Official Rom for Galaxy A3-
official Rom for Galaxy A3 is now available you can Download and install this Rom on your Galaxy A3 SM-A300F by Following bellow Guide,

Download and install stock rom/ firmware /flash file on Galaxy A3 A300F, today we will show you how to install stock Rom on Galaxy A3, this is a latest firmware file for Galaxy A3 which is flashable through odin, you can unbrick your Galaxy A3 by using this Rom, after flashing the Rom you are back on stock and all personal data will erased, you can also use this Rom to restore software functions, follow Bellow guide to install official Rom on Galaxy A3,

Requirements-

• odin
• Samsung Driver
• Rom file {Switzerland}

Note-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• This is the stable version of Rom/Recovery.
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process

Read also-

• How to Repair IMEI Number on Android Devices
• Backup Stock Rom on Android without Recovery
• How to Increase Internet Speed {signal} On Android Devices

Steps To Install Stock Rom On Samsung Galaxy A3 SM-A300F-
1) First enable USB debugging and OEM Unlock from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Now download stock firmware from above
3) Now Download the Odin tool from above and extract the zip file.
4) Run the Odin_v3.10.7.exe file on your PC.
5) Connect your Galaxy j7 Prime to your PC with the data cable and reboot into the Download/Odin mod
6) To enter into download mode turn off your phone and press and hold the ‘Home + Volume Down + Power’ buttons together until you see the download mode screen.
7) Once you enter into Download mode, you see an ID: COM port turned blue and Added message in Odin message box means your device has recognized by Odin.
8) If ID: COM doesn’t show means your driver is not correctly installed or try it with different USB cable.
9) Now locate and add the Rom.tar.md5 file (you downloaded from above) to the AP/PDA tab in Odin.

10) Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“
11) Now click ‘Start‘ button and it will start flashing the file. Wait until you see ‘Pass‘ in Green Color on Odin screen. This step will install stock rom on your Device.

12) Now boot your device into the recovery mode by pressing and holding ‘Home + Volume Up + Power‘ buttons for few seconds.
This Is the complete guide to Install Stock/official Rom On Galaxy A3 SM-A300F, if you face any problem put you comment,
Search tag-

stock rom Galaxy A3 SM-A300F, firmware for Galaxy A3 SM-A300F, flash file for Galaxy A3 SM-A300F, rom download for Galaxy A3 SM-A300F, rom install onGalaxy A3 SM-A300F, cara install offcial rom on samsung Galaxy A3 SM-A300F, flash file for samsung Galaxy A3 SM-A300F, samsung Galaxy A3 SM-A300F officla rom, firmware download Galaxy A3 SM-A300F,