How to Install twrp Recovery and Root Doogee Y6 Max 3D

Root twrp for Doogee Y6 max 3D-

twrp recovery and root Guide now available for Doogee Y6 max 3D, you caan install twrp Recovery and root your Doogee Y6 max 3D by Following Bellow Guide,
 

this is a latest twrp recovery and root For Doogee Y6 max 3D, you can install twrp{cyanogen mod}Recovery  on your Device via SP flash tools and the Root your Device by flashing latest SuperSu.zip File, Rooting may void Your Device warranty so be careful, after Rooting you can ulock real power of your Device, you can install custom Rom and custom zip file on your Device after Rooting, Follow Bellow Guide to install twrp recovery and root Doogee Y6 max 3D,

Note:-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• This is the stable version of Rom/Recovery.
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process

Read Also-

• How to Repair IMEI Number on Android Devices
• Backup Stock Rom on Android without Recovery
• How to Increase Internet Speed {signal} On Android Devices

Requirements-  

• Sp Flash tool latest Support Mt67XX / or Use From Rom 
• pc and usb  
• vcom Driver must installed  
• twrp For y6 max 3D
• Philz Recovery Optional 
• SuperSU  
• How to install Xposed framework On Doogee Y6 Max 3D

How to Install twrp on Doogee Y6 Max 3D-

Step 1.Download sp flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.install correct adb and Vcom driver in your PC from above link.[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.go to extracted Sp tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in sp tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

So This is the Complete Guide to Install twrp Recovery on Doogee Y6 Max 3D  if you have any question Let Us Know Via Comment,
Note- fastboot Guide for unlocked Bootloader-

• put twrp in adb folder, rename it recovery.img
• to flash recovery use this command- fastboot flash recovery recovery.img 

How to Root Doogee Y6 Max 3D-

• Download Supersu.zip from above and put into Root Of Sd Card
• Boot Device into twrp [use command adb reboot recovery] or hold power and volume up key on switch of mod
• Allow Modification
• make a nandroid backup
• Click install Zip from sd crad
• Locate Downloaded Supersu.zip file and Swipe to install
• after Success go back and reboot system now
• Done,

So this IS the complete Guide to Root Doogee Y6 Max 3D, if you have any question let us know via comment
 

Search tag-

root Doogee Y6 Max 3D, twrp Doogee Y6 Max 3D, rooting guide for Doogee Y6 Max 3D, root steps for Doogee Y6 Max 3D,  rooting instructions for Doogee Y6 Max 3D, root step by step for Doogee Y6 Max 3D, root my Doogee Y6 Max 3D without pc, custom Rom for Doogee Y6 Max 3D, best rom for Doogee Y6 Max 3D, cwm for Doogee Y6 Max 3D, cyanogenmod recovery for Doogee Y6 Max 3D,