How to Install twrp Recovery and Root Doogee X7 Pro

Root twrp for Doogee X7 Pro-
twrp Recovery now available for X7 Pro, you can install twrp Recovery and root your X7 Pro by following below Guide,

This IS a latest twrp Recovery 3.0 For Doogee X7 Pro, and we will show you How to Install twrp Recovery and Root Doogee X7 Pro, you can install twrp Recovery Sp flash tools and then Root your Doogee X7 Pro by Flashing latest Supersu.zip, Rooting may Void your Device warranty so be careful before Doing anything,you can unlock real power of Your Device after Rooting, you can install custom rom, custom ZiP file on your Device, you can also use xposed framework to tweak your Device using various modules, follow Bellow Guide to install twrp Recovery and root Doogee X7 Pro,

Note:-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• This is the stable version of Rom/Recovery.
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process

Read Also-

• How to Repair IMEI Number on Android Devices
• Backup Stock Rom on Android without Recovery
• How to Increase Internet Speed {signal} On Android Devices

Requirements-

• Sp Flash tool latest Support MT67XX / or Use From Rom 
• pc and usb  
• vcom Driver must installed  
• twrp For x7 Pro
• SuperSU  
• How to install Xposed framework On X7 Pro

How to Install twrp on Doogee X7 Pro-

Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.install correct adb and Vcom driver in your PC from above link.[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.go to extracted Sp tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in sp tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

So This is the Complete Guide to Install twrp Recovery on Doogee X7 Pro if you have any question Let Us Know Via Comment,

Note- flash modified boot img using same method,{if available}
Note- fastboot Guide for unlocked Bootloader-

• put twrp in adb folder, rename it recovery.img
• to flash recovery use this command- fastboot flash recovery recovery.img 

How to Root Doogee X7 Pro-

• Download Supersu.zip from above and put into Root Of Sd Card
• Boot Device into twrp [use command adb reboot recovery] or hold power and volume up key on switch of mod
• Allow Modification
• make a nandroid backup
• Click install Zip from sd crad
• Locate Downloaded Supersu.zip file and Swipe to install
• after Success go back and reboot system now
• Done,

So this IS the complete Guide to Root Doogee X7 Pro, if you have any question let us know via comment,
Search tag-

root Doogee X7 Pro, twrp for Doogee X7 Pro, como rooten Doogee X7 Pro, root steps for Doogee X7 Pro, root guide for Doogee X7 Pro root steps for Doogee X7 Pro, rooting instrcutions for Doogee X7 Pro, rooting guide for Doogee X7 Pro, step by step root Doogee X7 Pro, root Doogee X7 Pro without pc, Doogee X7 Pro como rooten Doogee X7 Pro,