How to Install Stock Rom on Evertek EverStar S

Stock Rom for Evertek EverStar S-
Official Rom now available for Evertek EverStar S, you can Download and install this Rom on your Device by Following Below Guide,

This is a latest tested Rom For Evertek EverStar S, and here is a Step by Step Guide to Download and Install Stock Rom on Evertek EverStar S, the Rom come with a Scatter file so you can Flash it Via SP flash tools, after flashing the Rom you are back on Stock and all personal data will erased, you can also use this Rom in Development, wrong flashing the rom cause damage on your Device so be careful before doing anything, we are not responsible for any damage, follow below Guide to install Stock Rom on Evertek EverStar S,

Firmware Details-

Device- Evertek EverStar S

OS- Marshmallow

Language- Multi

Root Access- Not

Chip- Mediatek

Note-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• This is the stable version of Rom/Recovery.
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process,

Read also-

• How to Repair IMEI Number on Android Devices
• Backup Stock Rom on Android without Recovery
• How to Increase Internet Speed {signal} On Android Devices

Requirements-

• Sp Flash tool latest Support MT67XX / or Use From Rom
• pc and usb
• vcom Driver must installed
• Rom file full zip

How to install Stock Rom on Evertek EverStar S-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.install correct adb and Vcom driver in your PC from above link.[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.go to extracted Sp tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in sp tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

So This is the Complete Guide to Install Stock Rom on Evertek EverStar S if you have any question Let Us Know Via Comment,
Search tag-

Stock rom for Evertek EverStar S, firmnware for Evertek EverStar S, flash filwe for Evertek EverStar S, rom install Evertek EverStar S, car flash Evertek EverStar S, flashing guide for Evertek EverStar S flash file for Evertek EverStar S, rom install onEvertek EverStar S cara root Evertek EverStar S,